Altium

Design Rule Verification Report

Date: 9/18/2024
Time: 2:57:08 AM
Elapsed Time: 00:00:02
Filename: E:\L\Projects\Robotics\MotorDriver.Electronics\MotorDriver\Board.PcbDoc
Warnings: 0
Rule Violations: 9

Summary

Warnings Count
Total 0

Rule Violations Count
Clearance Constraint (Gap=0.2mm) (All),(All) 0
Short-Circuit Constraint (Allowed=No) (All),(All) 0
Un-Routed Net Constraint ( (All) ) 4
Modified Polygon (Allow modified: No), (Allow shelved: No) 0
Width Constraint (Min=0.15mm) (Max=4mm) (Preferred=0.2mm) (All) 0
Routing Topology Rule(Topology=Shortest) (All) 0
Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All) 0
Hole Size Constraint (Min=0.025mm) (Max=2.54mm) (All) 0
Hole To Hole Clearance (Gap=0.2mm) (All),(All) 0
Minimum Solder Mask Sliver (Gap=0.2mm) (All),(All) 4
Silk To Solder Mask (Clearance=0.254mm) (IsPad),(All) 1
Silk to Silk (Clearance=0.254mm) (All),(All) 0
Net Antennae (Tolerance=0mm) (All) 0
Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All) 0
Total 9

Un-Routed Net Constraint ( (All) )
Un-Routed Net Constraint: Track (0mm,0mm)(0mm,30mm) on Top Layer Dead Copper - Net Not Assigned.
Un-Routed Net Constraint: Track (0mm,0mm)(30mm,0mm) on Top Layer Dead Copper - Net Not Assigned.
Un-Routed Net Constraint: Track (0mm,30mm)(30mm,30mm) on Top Layer Dead Copper - Net Not Assigned.
Un-Routed Net Constraint: Track (30mm,0mm)(30mm,30mm) on Top Layer Dead Copper - Net Not Assigned.
Back to top

Minimum Solder Mask Sliver (Gap=0.2mm) (All),(All)
Minimum Solder Mask Sliver Constraint: (0.194mm < 0.2mm) Between Region (0 hole(s)) Top Solder And Region (0 hole(s)) Top Solder [Top Solder] Mask Sliver [0.194mm]
Minimum Solder Mask Sliver Constraint: (0.194mm < 0.2mm) Between Region (0 hole(s)) Top Solder And Region (0 hole(s)) Top Solder [Top Solder] Mask Sliver [0.194mm]
Minimum Solder Mask Sliver Constraint: (0.194mm < 0.2mm) Between Region (0 hole(s)) Top Solder And Region (0 hole(s)) Top Solder [Top Solder] Mask Sliver [0.194mm]
Minimum Solder Mask Sliver Constraint: (0.194mm < 0.2mm) Between Region (0 hole(s)) Top Solder And Region (0 hole(s)) Top Solder [Top Solder] Mask Sliver [0.194mm]
Back to top

Silk To Solder Mask (Clearance=0.254mm) (IsPad),(All)
Silk To Solder Mask Clearance Constraint: (0.201mm < 0.254mm) Between Pad U?-1(5.791mm,20.682mm) on Top Layer And Text "*" (5.22mm,20.86mm) on Top Overlay [Top Overlay] to [Top Solder] clearance [0.201mm]
Back to top